1KVA Transformer
ELECTRON FREQUENCY CONVERTER
60 to 50 Hz · 50 to 60 Hz · 60 to 60 Hz Isolation · 50/60 to 400 Hz
Solid State Frequency Converter Specifications
| Model | 1.5KSS6050/5060 |
| Capacity | 1.5KVA/1050W |
| Input | |
| Voltage | 120 or 220V |
| Voltage Range | 120V-15%/+20% or 220V-15%/+20% |
| Current
Requirement |
220V – 7.8A @ Full Load (11.8A @ Current limit) |
| 120V – 14.4A @ Full Load (21.6A @ Current limit) | |
| Frequency | Any Frequency from 45 – 65 hz (specify if 400hz) |
| Phase | Single |
| Output | |
| Voltage | 120 or 220Vac ±20% Adjustable from nominal |
| Voltage Regulation | ±1% From setpoint |
| Frequency | 50Hz or 60Hz (selectable with switch) |
| Frequency Regulation | ±.0005 Hz |
| Harmonic Distortion | < 3% at 100% Linear Load |
| Output Waveform | Pure Sinewave |
| Output Current @ .7pf | 220V-6.8A |
| 120V-12.5A | |
| Non-Linear Peak Current for 30 sec. | 220V-10.2A |
| 120V-18.8A | |
| Power Factor | 0.7 |
| Efficiency | |
| AC to AC | >85% |
| Protection | |
| Overload Capacity | 110% continuous, 110-150% load 30 seconds, over 150% causes unit to shut down. Auto restart upon removal of overload. |
| Short Circuit | Unit will cut out and must be manually restarted |
| EMI Filter | 10-100KHz at 40dB, 100KHz-100MHz at 70dB (CE Approved) |
| Over Temperature | Inverter auto cut-off when heat sink temp. over 80° C |
| Audible Alarm | |
| Overload | Sounds continuously |
| Converter Fault | Sounds continuously |
| Indicator | |
| LCD | Converter status, INPUT & OUTPUT voltage-frequency, loading % |
| LED | Line(Utility Power On): Green LED Fault: Red LED
Inverter(Converter Power Output): Green LED Overload: Yellow LED |
| Environment | |
| Operation Temp. | 0-40° C; 32-104° F |
| Relative Humidity | 20-90% non-condensing |
| Audible Noise | < 45dB |
| Physical | |
| Net Weight |
144lbs/64.8kg |
| Dimension | |
| Depth |
21 3/8in/54.2cm |
| Width |
7 1/8in/18.1cm |
| Height |
19 3/8in/49.3cm |
