12KVA Converter
ELECTRON FREQUENCY CONVERTER
60 to 50 Hz · 50 to 60 Hz · 60 to 60 Hz Isolation · 50/60 to 400 Hz
Solid State Frequency Converter Specifications
| Model | 12KSS 6050/5060 |
| Capacity | 12KVA/8.4 kW |
| Input | |
| Voltage | 230 VAC (200-240VAC adjustable) |
| Current
Requirement |
220V – 60A @ Full Load (90A @ Current limit) |
| 120V – 110A @ Full Load (165A @ Current limit) | |
| Frequency | Any Frequency from 45 65 hz (specify if 400hz) |
| Phase | Single |
| Supply demand | 75 Amps @ 220V Full Load |
| AC/AC Efficiency | 91% |
| Output | |
| Voltage | 120 or 220Vac ±20% Adjustable from nominal |
| Voltage Regulation | ±1% From setpoint |
| Phase | Single |
| Frequency | 50Hz or 60Hz (Switch selectable) (400Hz available) |
| Output Waveform | Pure Sinewave |
| Output Current @.8PF | 220V – 54.5A |
| 208V – 57.7A | |
| 120V – 100A | |
| Total Harmonic Distortion | < 5% (typical for non-linear load)
<3% (typical for linear load) |
| Load Crest Ratio | 3:1 (300% @ .2PF for motor start loads) |
| Common Mode Noise Rejection | >100dB |
| Dynamic Response | ±4% for a 50-100% step load change. 1ms recovery time. |
| Overload Capacity | 120% for 500ms |
| Mechanical Specifications | |
| Weight | 372 lbs. (typical)/169kg |
| Width | 18.9in/48cm |
| Depth | 13.6in/34.5cm |
| Height | 34in/86.4cm |
| General | |
| Audible Noise1 | 55dBA @ 3 ft. |
| Operating Temperature | 0-40° C; 32-104° F |
| Cooling | Low velocity forced air |
| Relative Humidity (non-condensing) | 10-90% |
