2KVA

ELECTRON FREQUENCY CONVERTER

60 to 50 Hz · 50 to 60 Hz · 60 to 60 Hz Isolation · 50/60 to 400 Hz

Solid State Frequency Converter Specifications

Model 2KSS6050/5060
Capacity 2KVA/1.4kW
Input
Voltage 120 or 220V
Voltage Range 120V-15%/+20% or 220V-15%/+20%
Current

Requirement

220V – 10.45A @ Full Load (15.7A @ Current limit)
120V – 19.2A @ Full Load (28.75A @ Current limit)
Frequency Any Frequency from 45 65 hz (specify if 400hz)
Phase Single
Output
Voltage 120 or 220Vac ±20% Adjustable from nominal
Voltage Regulation ±1% From setpoint
Frequency 50Hz or 60Hz (Switch selectable)  (400Hz available)
Frequency Regulation ±.0005 Hz

crystal oscillator

Harmonic Distortion < 3% at 100% Linear Load
Output Waveform Pure Sinewave
Output Current @.7pf 220V – 9A
120V – 16.6A
Non-linear Peak Current for 30 sec. 220V – 13.5A
120V – 24.9A
Power Factor 0.7
Efficiency
AC to AC >85%
Protection
Overload Capacity 110% continuous, 110-150% load 30 seconds, over
150% causes unit to shut down. Auto restart upon removal of overload.
Short Circuit Unit will cut out and must be manually restarted
EMI Filter 10-100KHz at 40dB, 100KHz-100MHz at 70dB
Over Temperature Inverter auto cut-off when heat sink temp. over 80° C
Audible Alarm
Overload Sounds continuously
Converter Fault Sounds continuously
Indicator
LCD Converter status, INPUT & OUTPUT voltage-frequency, loading %
LED
Line: Green LED Inverter: Green LED
Fault: Red LED Overload: Yellow LED
Environment
Operation Temp. 0-40° C; 32-104° F
Relative Humidity 20-90% non-condensing
Audible Noise < 45dB
Physical
Net Weight 144lbs/64.8kg
Dimension
Depth 21 3/8in/54.2cm
Width 7 1/8in/18.1cm
Height 19 3/8in/49.3cm

Have a Design Question?

We are here to help, contact our team

866-984-6685 or sales@50hz.com