ELECTRON FREQUENCY CONVERTER

60 to 50 Hz · 50 to 60 Hz · 60 to 60 Hz Isolation · 50/60 to 400 Hz
1.5KVA
Solid State Frequency Converter Specifications
Model 1KSS6050/5060
Capacity 1KVA/700W
Input
Voltage 120 or 220V
Voltage Range 120V-15%/+20% or 220V-15%/+20%
Current
Requirement
220V – 5.2A @ Full Load (7.8A @ Current limit)
120V – 9.6A @ Full Load (14.3A @ Current limit)
Frequency Any Frequency from 45 65 hz (specify if 400hz)
Phase Single
Output
Voltage 120 or 220Vac ±20% Adjustable from nominal
Voltage Regulation ±1% From setpoint
Frequency 50Hz or 60Hz (Switch selectable) (400
Hz available)
Frequency Regulation ±.0005 Hz
Harmonic Distortion < 3% at 100% Linear Load
Output Waveform Pure Sinewave
Output Current @ .7pf 220V – 4.5A
120V – 8.3A
Non-Linear Peak
Current for 30 sec.
220V – 6.8A
120V – 12.5A
Power Factor 0.7
Efficiency  
AC to AC >85%
Protection  
Overload Capacity 105% continuous, over 105% causes unit to shut
down. Auto restart upon removal of overload.
Short Circuit Unit will cut out and must be manually restarted
EMI Filter 10-100KHz at 40dB, 100KHz-100MHz at 70dB (EN
50091-2 CE approved)
Over Temperature Inverter auto cut-off when heat sink temp. over
80° C
Audible Alarm  
Overload Sounds continuously
Converter Fault Sounds continuously
Indicator  
LCD Converter status, INPUT & OUTPUT voltage-frequency,
loading %
LED
Line: Green LED Inverter: Green LED
Fault: Red LED Overload: Yellow LED
Environment  
Operation Temp. 0-40° C; 32-104° F
Relative Humidity 20-90% non-condensing
Audible Noise < 45dB @ 3 ft.
Physical  
Net Weight

67.5lbs/ 30.7kg

Dimension  
Depth

16in/ 40.6cm

Width

7.1in/ 18cm

Height

12.1in/ 30.73cm

Which Design?
What Size?