2KVA Solid State Frequency Converter Specifications

Model 2KSS6050/5060
Capacity 2KVA/1.4kW
Input
Voltage 120 or 220V
Voltage Range 120V-15%/+20% or 220V-15%/+20%
Current
Requirement
220V - 10.45A @ Full Load (15.7A @ Current limit)
120V - 19.2A @ Full Load (28.75A @ Current limit)
Frequency Any Frequency from 45 65 hz (specify if 400hz)
Phase Single
Output
Voltage 120 or 220Vac 20% Adjustable from nominal
Voltage Regulation 1% From setpoint
Frequency 50Hz or 60Hz (Switch selectable) (400 Hz available)
Frequency Regulation .0005 Hz
crystal oscillator
Harmonic Distortion < 3% at 100% Linear Load
Output Waveform Pure Sinewave
Output Current @.7pf 220V - 9A
120V - 16.6A
Non-linear Peak Current for 30 sec. 220V - 13.5A
120V - 24.9A
Power Factor 0.7
Efficiency  
AC to AC >85%
Protection  
Overload Capacity 110% continuous, 110-150% load 30 seconds, over 150% causes unit to shut down. Auto restart upon removal of overload.
Short Circuit Unit will cut out and must be manually restarted
EMI Filter 10-100KHz at 40dB, 100KHz-100MHz at 70dB
Over Temperature Inverter auto cut-off when heat sink temp. over 80 C
Audible Alarm  
Overload Sounds continuously
Converter Fault Sounds continuously
Indicator  
LCD Converter status, INPUT & OUTPUT voltage-frequency, loading %
LED
Line: Green LED Inverter: Green LED
Fault: Red LED Overload: Yellow LED
Environment  
Operation Temp. 0-40° C; 32-104° F
Relative Humidity 20-90% non-condensing
Audible Noise < 45dB
Physical  
Net Weight 144lbs/64.8kg
Dimension  
Depth 21 3/8in/54.2cm
Width 7 1/8in/18.1cm
Height 19 3/8in/49.3cm

Specifications subject to change without notice.



Print This Page