12KVA Solid State Frequency Converter Specifications

Model	12KSS 6050/5060
Capacity	12KVA/8.4 kW
Input
Voltage	230 VAC (200-240VAC adjustable)
Current Requirement	220V - 60A @ Full Load (90A @ Current limit)
Current Requirement	120V - 110A @ Full Load (165A @ Current limit)
Frequency	Any Frequency from 45 65 hz (specify if 400hz)
Phase	Single
Supply demand	75 Amps @ 220V Full Load
AC/AC Efficiency	91%
Output
Voltage	120 or 220Vac ±20% Adjustable from nominal
Voltage Regulation	±1% From setpoint
Phase	Single
Frequency	50Hz or 60Hz (Switch selectable) (400 Hz available)
Output Current @.8PF	220V - 54.5A
	208V - 57.7A
	120V - 100A
Total Harmonic Distortion	< 5% (typical for non-linear load) < 3% (typical for linear load)
Load Crest Ratio	3:1 (300% @ .2PF for motor start loads)
Common Mode Noise Rejection	>100dB
Dynamic Response	±4% for a 50-100% step load change. 1ms recovery time.
Overload Capacity	120% for 500ms
Mechanical Specifications
Weight	372 lbs. (typical)/169kg
Width	18.9in/48cm
Depth	13.6in/34.5cm
Height	34in/86.4cm
General
Audible Noise¹	55dBA @ 3 ft.
Operating Temperature	0-40° C; 32-104° F
Cooling	Low velocity forced air
Relative Humidity (non-condensing)	10-90%

¹Specifications subject to change without notice.