4KVA Solid State Frequency Converter Specifications 400hz

Model 4KSS60400/50400
Capacity 4KVA/3.2KW
Voltage 120V or 220V *see note
Voltage Range -15%/+20%
220V - 20.9A @ Full Load (31.4A @ Current limit)
120V - 38.3A @ Full Load (57.5A @ Current limit)
Frequency 50Hz or 60Hz 5%
Phase Single
Voltage 115V (Locked)
Voltage Regulation ±1%
Frequency 400Hz
(50/60hz available)
Frequency Regulation ±0.016Hz (Xtal oscillator)
Harmonic Distortion <3% (100% linear load.)
Output Waveform Pure Sinewave
Output Current @ .8pf 220V - 18.1A
120V - 33.3A
Overload@150% for 30 seconds 220V - 27.2A
120V - 50A
AC to AC >85%
Power Factor 0.8
Crest Factor 3:1
Indicator- Detachable& Remote Control
LCD Automatically configures to monitor voltage, frequency and loading, simultaneously.
Line: Green LED Inverter: Green LED
Fault: Red LED Overload: Yellow LED
Audible Alarm
Overload Continuously beeping
Fault Continuously beeping
Overload 150% delay 30 seconds, current limited
Short Circuit Current limited cut-off, fuse and breaker
EMI filter 10-100KHz at 40dB; 100KHz-100MHz at 70dB
Over Temperature Inverter auto cut-off when heatsink temp. over 80ºC
Depth 22.9in/58cm
Width 9.63in/24.5cm
Height 27.75in/70.5cm
Operation Temperature 0-40° C; 32-104° F
Relative Humidity 20-90% (non-condensing)
Noise Level < 58dB (at 1 meter)
LBS/KG 232lbs/105.5kg (on wheels)
Note: Input voltages of 208V single phase (phase-to-phase on a 3-phase 120/208V line)- with 2 hot lines and 240V single phase (from a 120/20V split-phase source) - 2 hot lines are both acceptable with one hot on the input N ternimal, and another hot on the L2 input terminal.

Specifications subject to change without notice.

Print This Page